FREE Dot Gain Tool

To correct INK BALANCE (GREY BALANCE) of your printing process ON-THE-FLY
enter only 8 numbers* and get profesional instructions for FREE as many times as you wish.
To do this you need to measure our control strip added to your print job.

* You can measure these parameters with every Lab compartible device. If you don't have one, we can recommend an X-Rite EYE-ONE as cost-effective solution.

If you wish to use the materials on this page over the internet, you are obliged to preserve the link to it.

1. Set your device to Lab measurement.
2. Measure 5 color patches and enter appropriate values below.

3. Push the button "REQUEST".
4. Read our instructions below.

1-st patch values:

L= ...   a=     b= 

2-nd patch values:

L= ...   a=     b= 

3-rd patch values:

L= ...   a=     b= 

4-th patch values:

L=     a= ...   b=  ...

5-th patch values:

L=     a= ...   b= ...
Contact us

This page was viewed     times.

If you wish to use the materials on this page over the internet, you are obliged to preserve the link to it.